TERRA-EXTRACTOR X 300 C

Lanový trhač potrubí 30 tun, dismountable

		Zerlegbarer Seilberster (english: cable burster disassembable)

Pipe renewal with the cable burster X 300 C - ideal for cellars and manholes

    The TERRA-EXTRACTOR X 300 C is an innovative cable burster for replacement of old pipes made from cast iron, steel, clay ware or PE/PVC. With this machine you can burst old pipes with Ø 34 - 220 mm (1.5“ – 8.5“) and pull in new HDPE pipes with Ø 63 – 180 mm (2.5” – 7”) in lengths up to 120 m (400 ft). With a maximum pulling force of 300 kN (30 tonnes / 66‘000 lb/33 US tons) it is a strong but compact machine.

    The Cable Burster X 300 C can operate on smallest areas of L x W = 0.42 m x 0.60 m (16.5” x 22.6”).

    The X 300 C can be installed in manholes of Ø 800 mm (32") and dismounted it can be lifted through manhole entries of Ø 620 mm (25").

    Special cables Ø 22 mm (0.9”) and Ø 14 mm (0.6”) allow the replacement of smallest pipes.

Pipe renewal with the cable burster X 300 C - ideal for cellars and manholes
Pipe renewal with the cable burster X 300 C - ideal for cellars and manholes


Dismountable

    The Cable Burster X 300 C can be disassembled easily into components less than 45 kg (100_lb). Thereby it can be carried into cellar rooms or manholes.

    The assembled X 300 C can be lifted at its two lifting eyes.

Dismountable
Dismountable


Unique clamping jaws

    Four cable clamps with longitudinal slots (patented) guarantee secure contact to the pulling cable, no matter if the cable is new or dirty.
    The main clamp clamps the cable when the two cylinders push the main clamp upwards.

    The counter clamp holds the cable under tension when the two cylinders move downwards and the main clamp is released.

Unique clamping jaws
Unique clamping jaws


Power Pack

  1. Petrol engine 22 HP (16.5 kW)
  2. Electric starter and battery
  3. Optional oil cooler
  4. Large hydraulic oil tank
  5. Can be lifted into a truck by two persons

Power Pack
Power Pack


 

Technické údaje

Technické údaje



Technické specifikace se mohou změnit bez předchozího upozornění.
maximální tažná síla
300 kN (30 to) bei 235 bar
66'000 lbs (33 US tons)
Old pipe range
Ø 34 - 220 mm
Ø 1.5" - 8.5"
New pipe range
Ø 63 - 180 mm
Ø 2.5" - 7"
Bursting length
bis zu 120 m
up to 400 ft
zpřísnění točivého momentu rychlost
- v 30 l/min oleje
90 m/h (1.5 m/min)
300 ft/h (5 ft/min)
Max. operating pressure
235 bar
3'400 psi
Required oil volume
20 - 60 ltr/min
5 - 15 gpm
přetáhl si přes kabel
Ø 22 mm
Ø 0.86"
Cable weight
2.34 kg/m
1.57 lb/ft
D x S x V
0.42 x 0.60 x 1.25/1.50 m
16.5" x 22.6" x 49"/59"
Hmotnost (bez kabelovky)
260 kg
572 lb
Maximum weight of one part, dissassembled
45 kg
100 lb


 nahoru

TERRA AG für Tiefbautechnik - Hauptstrasse 92 - 6260 Reiden - Schweiz - Tel. +41 62 749 10 10 - office@terra-eu.eu